Bright Solutions

Help & support +880 1755 666565

Walk-Through Metal Detector

Product Description

ThruScan s9

Conforms to European Norms and in Compliance with NILECJ-0601.00 L1-5 Standard and produced under ISO 9001: 2008 QMS

Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)

Multi-Zone – 9 Matrix Detection Zones(Up/Middle/Down and Left/Middle/Right)

Whilst Normal Operation, displays IN/OUT Counters and Security Level on LCD without abbreviations so that Security Staff can easily understand

Capable to Detect both Ferrous and Non-Ferrous Metallic Objects Considered Dangerous by International Security Authorities.

Can detect test objects both individually and in combination.

Displays the Detected Metal Objects location on Both Side Panels LEFT/RIGHT from bottom to top with Continuous LED Zone Indicators

Detects all threat objects even concealed, hidden with camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

No Interferences between Zones and No False Alarms

Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top

Detects Metals regardless their orientation 

10 sensitivity levels, 246 adjustable sensitivity steps at each, 1 Standard Preset International Security program

Metal Density-Mass, Signal Strength Display at 10-level-VU

meter with green, yellow, red LEDs easily allows sight from distance

Superior Discrimination, Precise target location identification / Graphic zone display on Control Unit

Metal Density/Mass estimation with signal strength display

Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects are placed close by

Human Health friendly Very Low Frequency VLF technology. No affects to Pace Makers, Pregnant and Magnetic Media

Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute

Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 4×20 Characters LCD Screen 

Visual display of magnetic interference from environment

Adjustable audio alarm at 10 tons/level or Soundless (Mute) operation

IP 44 Protection Level – IP 65 Optional (EN 60529)

Five Digit Incoming Counter (can be made Invisible)

Alarm Counter separately (removable)

Interference free Operation from other Electronic Devices

Does Not affect other Electronic Equipments. Necessary filtering

precautions have been taken.

Four-digit changeable digital Pin Code

Automatic Failure Display with Continuous Self-Checking of Key Parameters. (BITE – Built-in Test Equipment)

Reloading the factory default settings by one-touch button

Easy programming and monitoring with wide LCD display

4 Menu Languages, Standard menu in English, German, Spanish and Turkish

Relay output for recording CCTV, Photo Taken-Recording, controlling turnstiles, etc.

Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains

No seasonal adjustment requirement thanks to its Digital Electronic System (DSP)

Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design

Manufactured for 7/24 Continuous Operation

74 cm Net Passage Width and 200 cm Net Passage Height

Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects

Audio-Visual alarms are noticeable at a range of 4 meters

Micro-Processor Settings does not change when there is an electricity cut-off

No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices

All Electronic Units (electronic unit, power supply, battery,

adapter etc..) are inside the Equipment. No outer units.

Floor Fixing Corrosion Resistant Metal Footers for proper assembly and durable use.

Resistant to Vibration & Impact

OPTIONAL-SCADA software-controlled remote data communication and Networking of Multiple Metal Detectors; Software Change settings by PC

Manufactured using the latest technology and advance components

Technical Features:

Ambient Temperature: -20°C to +70°

Operating voltage: 70VAC – 270VAC / 50Hz – 60Hz

Power: 10W Stand By- 20W (Alarm)

Package Dimensions (W x L x H ):

Box 1: 81 x 234 x 21  cm

Box 2: 25 х 80 х 26 cm

Gross Weight: 73 Kg

Net Weight: 58 Kg

2 Years Warranty and 10 Years Parts Supply Availability as per our “General Conditions of sales, Delivery & Warranty”